SiF SilaSeal – Water Based Penetrative Sealer
SiF SilaSeal – Water Based Penetrative Sealer
SAME DAY CLEAN & SEAL - 1 FLOOD COAT APPLICATION - Penetrating Sealer System
SilaSeal is a water based silane-siloxane sealer used for sealing porous reconstituted and natural stone, clay and concrete materials. Suitable for garages, walls, roofs, entertaining areas, kitchens and wet areas, pool surrounds, patios, driveways. Not recommended for use on very dense substrates.
Key advantages
- Superior water repellence, providing excellent water based stain resistance
- Reduces water ingress and minimises efflorescence in mineral substrates
- Transparent, natural finish - does not significantly change appearance
- High penetration into masonry surfaces
- High wear resistance, UV stable, long life
- Fungal and algal resistance
- Easy to clean surfaces
- Substrates remain breathable
- Can be applied to damp or wet substrates
Read the product information before application.
- The surface to be treated should be clean and free of all contaminants.
- The surface can be damp or wet, however SilaSeal should not be applied to a surface that has pools of water. The pools should be removed using a broom or cloth prior to application.
- Do not apply SilaSeal if rain is expected within 24 hours of application. Do not apply if extreme weather conditions are expected. Do not apply if surface temperatures are above 30 degC. If necessary, cool the surface with water prior to application.
- This is the 5 L concentrate: dilute with water before use as directed on the label, and mix well.
- A test prior to application must be performed to assess the suitability of the product.
- SilaSeal is best applied using a low-pressure sprayer. The surface should be uniformly applied to saturation point.
- Do not allow pooling of sealer. Pools can be spread out using a soft bristled broom. Excess sealer must be removed before drying.
- Protect adjacent surfaces such as glass, metal or painted surfaces from any overspray.
- Full curing may take up to 24 hours. Avoid traffic for at least 24 hours.
- Equipment clean up can be performed with water.
Application: about 5 m² per litre of ready-to-use sealer · low-pressure spray, one flood coat · same-day clean and seal · cures in up to 24 hours (keep foot and vehicle traffic off until then) · no rain forecast within 24 hours, surface under 30 °C.