SiF SilaSeal Enhance - Water Based Penetrating Sealer

SAME DAY CLEAN & SEAL - 1 FLOOD COAT APPLICATION - Penetrating Sealer System

SilaSeal Enhance is a ready to apply enhancer for aggregate and honed concrete and concrete pavers.

• Darkens mortar and enhances stone in aggregate concrete based materials
• Provides superior water repellence and oil repellence
  
• Reduces efflorescence
  
• High wear resistance, long life
  
• UV stable
  
• Water based
  
• Non-film forming, allows breathability
  
• Fungal and algal resistance
  
• Does not peel or blister
  
• Can be applied to a damp/wet surface
  
• Suitable on both horizontal and vertical surfaces
  
• Can be spray applied
  

SilaSeal Enhance is a ready to apply, and enhancer for aggregate concrete and concrete pavers

Read the product information before application.

• The surface to be treated should be clean and free of all contaminants.
  
• The surface can be damp or wet, however SilaSeal Enhance should not be applied to a surface that has pools of water. The pools should be removed using a broom or cloth prior to application.
  
• Do not apply SilaSeal Enhance if rain is expected within 24 hours of application. Do not apply if extreme weather conditions are expected. Do not apply if surface temperatures are above 30 degC. If necessary, cool the surface with water prior to application.
  
• SilaSeal Enhance is ready to apply and should be mixed well before use.
• A test prior to application must be performed to assess the suitability of the product.
  
• SilaSeal Enhance may be spray applied using a low-pressure sprayer. The surface should be uniformly applied to saturation point.  For dense and non-textured surfaces such as honed concrete and natural stone, sealer can be sprayed, then  buffed using a microfibre mop.
  
• Do not allow pooling of sealer. Pools can be spread out using a soft bristled broom. Excess sealer must be removed before drying.
  
• Protect adjacent surfaces such as glass, metal or painted surfaces from any overspray.
  
• Full curing may take up to 24 hours. Avoid traffic for at least 24 hours.
  
• Equipment clean up can be performed with water.

Application: about 5 m² per litre of ready-to-use sealer · low-pressure spray, one flood coat · same-day clean and seal · cures in up to 24 hours (keep foot and vehicle traffic off until then) · no rain forecast within 24 hours, surface under 30 °C.

Safety Data Sheet (PDF)